Deploying NGINX and NGINX Plus with Docker

Docker is an open platform for orchestrating distributed applications.; open source NGINX (and the enhanced and commercially supported version, NGINX Plus) are great use cases for Docker, and this article describes how you can deploy the open source product.

Patrick Nommensen

Dec. 04, 15 · Tutorial

Likes (4)

Comment

Save

8.8K Views

Introduction

The Docker open platform includes the Docker Engine – the open source runtime that builds, runs, and orchestrates containers – and

Docker containers enable developers to focus their efforts on application “content” by separating applications from the constraints of infrastructure. Dockerized applications are instantly portable to any infrastructure – laptop, bare-metal server, VM, or cloud – making them modular components that can be readily assembled and re-assembled into fully featured distributed applications and continuously innovated on in real time.

For more information about Docker, see What is Docker? or the full Docker documentation.

Using the NGINX Docker Image

You can create an NGINX instance in a Docker container using the NGINX image from Docker Hub.

Let’s start with a very simple example. To launch an instance of NGINX running in a container and using the default NGINX configuration, run this command:

# docker run --name mynginx1 -P -d nginx \
fcd1fb01b14557c7c9d991238f2558ae2704d129cf9fb97bb4fadf673a58580d

This command creates a container named mynginx1 based on the NGINX image. The command returns the long form of the container ID, which is used in the name of log files; see Managing Logging.

The -d option specifies that it run in detached mode, which means that the container continues to run until stopped but does not respond to commands run on the command line. We discuss later how to interact with the container.

The -P option tells Docker to map the ports exposed in the container by the NGINX image – ports 80 and 443 – to ports on the Docker host that are randomly selected from the range between 49153 and 65535. We do this because otherwise there will be conflicts on ports 80 and 443 if we later create multiple NGINX containers on the same Docker host. The port mappings are dynamic and are set each time the container is started or restarted. If you want static port mappings, use the -p option to set them manually.

To verify that the container was created and is running, and to see the port mappings, we run docker ps. (We’ve split the output across multiple lines here to make it easier to read.)

# docker ps
CONTAINER ID  IMAGE         COMMAND               CREATED         STATUS         
fcd1fb01b145  nginx:latest  "nginx -g 'daemon of  16 seconds ago  Up 15 seconds  

PORTS                                         NAMES
0.0.0.0:49166->443/tcp, 0.0.0.0:49167->80/tcp mynginx1

The PORTS field in the output reports that port 49167 on the Docker host is mapped to port 80 in the container. Another way to verify that NGINX is running is to make an HTTP request to that port. The code for the default NGINX welcome page appears:

# curl http://localhost:49167
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
 body {
 width: 35em;
 margin: 0 auto;
 font-family: Tahoma, Verdana, Arial, sans-serif;
 }
</style>
</head>
<body>
<h1>Welcome to nginx!</h1>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p>

<p>For online documentation and support please refer to
<a href="http://nginx.org/">nginx.org</a>.<br/>
Commercial support is available at
<a href="https://www.nginx.com/">nginx.com</a>.</p>

<p><em>Thank you for using nginx.</em></p>
</body>
</html>

Working With the NGINX Docker Container

So now we have a working NGINX Docker container, but how do we manage the content and the NGINX configuration? And what about logging?

A Note About SSH

It is common to enable SSH access to NGINX instances, but the NGINX image does not have OpenSSH installed, because Docker containers are generally intended to be for a single purpose (in this case running NGINX), and for normal operations there is no need to have shell access directly to the NGINX container. Instead we’ll use other methods supported by Docker. For a detailed discussion of alternatives to SSH access, see Why You Don’t Need to Run SSHd in Your Docker Containers.

Managing Content and Configuration Files

There are several ways you can manage the content served by NGINX and the NGINX configuration files. Here we cover a few of the options.

Option 1: Maintaining the content and configuration on the Docker host When the container is created we can tell Docker to mount a local directory on the Docker host to a directory in the container. The NGINX image uses the default NGINX configuration, which uses/usr/share/nginx/html as the container’s root directory and puts configuration files in /etc/nginx. For a Docker host with content in the local directory /var/www and configuration files in/var/nginx/conf, run this command:
```
# docker run --name mynginx2 -v /var/www:/usr/share/nginx/html:ro \
  -v /var/nginx/conf:/etc/nginx:ro -P -d nginx
```
Now any change made to the files in the local directories /var/www and /var/nginx/conf on the Docker host are reflected in the directories /usr/share/nginx/html and /etc/nginx in the container. The :ro option means these directors are read only inside the container.
Option 2: Copying files from the Docker host Another option is to have Docker copy the content and configuration files from a local directory on the Docker host during container creation. Once a container is created, the files are maintained by creating a new container when files change or by modifying the files in the container. A simple way to copy the files is to create a Dockerfile with commands that are run during generation of a new Docker image based on the NGINX image from Docker Hub. For the file-copy (COPY) commands in the Dockerfile, the local directory path is relative to the build context where the Dockerfile is located. In our example, the content is in the content directory and the configuration files are in the confdirectory, both subdirectories of the directory where the Dockerfile is located. The NGINX image has the default NGINX configuration files, including default.conf and example_ssl.conf in the/etc/nginx/conf.d directory. Since we instead want to use the configuration files from the host, we include RUN commands that delete the default files:
```
FROM nginx
RUN rm /etc/nginx/conf.d/default.conf
RUN rm /etc/nginx/conf.d/example_ssl.conf
COPY content /usr/share/nginx/html
COPY conf /etc/nginx
```
We create our own NGINX image by running the following command from the directory where theDockerfile is located. Note the period (“.”) at the end of the command. It defines the current directory as the build context, which contains the Dockerfile and the directories to be copied.
```
# docker build -t mynginx_image1 .
```
Now we run this command to create a container called mynginx3 based on the mynginx_image1image:
```
# docker run --name mynginx3 -P -d mynginx_image1
```
If we want to make changes to the files in the container, we use a helper container as described in Option 3.
Option 3: Maintaining files in the container As mentioned previously in A Note About SSH, we can’t use SSH to access the NGINX container, so if we want to edit the content or configuration files directly we have to create a helper container that has shell access. For the helper container to have access to the files, we must create a new image that has the proper Docker data volumes defined for the image. Assuming we want to copy files as in Option 2 while also defining volumes, we use the following Dockerfile:
```
FROM nginx
COPY content /usr/share/nginx/html
COPY conf /etc/nginx
VOLUME /usr/share/nginx/html
VOLUME /etc/nginx
```
We then create the new NGINX image by running the following command (again note the final period):
```
# docker build -t mynginx_image2 .
```
Now we run this command to create an NGINX container based on the image:
```
# docker run --name mynginx4 -P -d mynginx_image2
```
We then run this command to start a helper container mynginx4_files that has a shell, enabling us to access the content and configuration directories of the mynginx4 container we just created:
```
# docker run -i -t --volumes-from mynginx4 --name mynginx4_files debian /bin/bash
root@b1cbbad63dd1:/#
```
The new mynginx4_files helper container runs in the foreground with a persistent standard input (the-i option) and a tty (the -t option). All volumes defined in mynginx4 are mounted as local directories in the helper container. The debian argument means that the helper container uses the Debian image from Docker Hub. Because the NGINX image also uses Debian (and all of our examples so far use the NGINX image), it is most efficient to use Debian for the helper container, rather then having Docker load another operating system. The /bin/bash argument means that the bash shell runs in the helper container, presenting a shell prompt that you can use to modify files as needed. You can also install other tools in the container to manage these files, such as Puppet or Chef. To start and stop the container, run the following commands:
```
# docker start mynginx4_files

# docker stop mynginx4_files
```
To exit the shell but leave the container running, press Ctrl-p followed by Ctrl-q. To regain shell access to a running container, run this command:
```
# docker attach mynginx4_files
```
To exit the shell and terminate the container, run the exit command.

Managing Logging

You can configure either default or customized logging.

Using default logging The NGINX image is configured to send the main NGINX access and error logs to the Docker log collector by default. This is done by linking them to stdout and stderr; all messages from both logs are then written to the file /var/lib/docker/containers/container-ID/container-ID-json.log on the Docker host. The container-ID is the long-form ID returned when you create a container. To display it, run this command:
```
# docker inspect --format '{{ .Id }}' container-name
```
You can use both the Docker command line and the Docker Remote API to extract the log messages. On the command line, run this command:
```
# docker logs container-name
```
To enable the Docker Remote API, add the following line to the file /etc/default/docker:
```
DOCKER_OPTS='-H tcp://0.0.0.0:4243 -H unix:///var/run/docker.sock'
```
Restart Docker, which starts listening for HTTP API requests on port 4243 (you can specify a different port) and also on a socket. To get all the messages, issue a GET request:
```
http://Docker-host:4243/containers/container-name/logs?stdout=1&stderr=1
```
To include only access log messages in the output, include only stdout=1; to limit the output to error log messages, include only stderr=1. To learn about other available options, see the Docker documentation.
Using customized logging If you want to implement another method of log collection, or if you want to configure logging differently in certain configuration blocks (such as server{} and location{}), define a Docker volume for the directory or directories in which to store the log files in the container, create a helper container to access the log files, and use whatever logging tools you like. To implement this, create a new image that contains the volume or volumes for the logging files. For example, to configure NGINX to store log files in /var/log/nginx/log, we can start with theDockerfile from Option 3 and simply add a VOLUME definition for this directory:
```
FROM nginx
COPY content /usr/share/nginx/html
COPY conf /etc/nginx
VOLUME /var/log/nginx/log
```
We can then create an image as described above and use it to create an NGINX container and a helper container that have access to the logging directory. The helper container can have any desired logging tools installed.

Controlling NGINX

Since we do not have direct access to the command line of the NGINX container, we cannot use thenginx command to control NGINX. Fortunately we can use signals to control NGINX, and Docker provides the kill command for sending signals to a container.

To reload the NGINX configuration, run this command:

# docker kill -s HUP container-name

To restart NGINX, run this command to restart the container:

# docker restart container-name

Deploying NGINX Plus with Docker

So far we have discussed Docker for the open source NGINX product, but you can also use it with the commercial version, NGINX Plus. The difference is you first need to create an NGINX Plus image, because as a commercial offering NGINX Plus is not available at Docker Hub. Fortunately, this is quite easy to do.

Creating a Docker Image of NGINX Plus

To generate an NGINX Plus image, first create a Dockerfile. Here we provide examples for Ubuntu 14.04 and CentOS 7.0 that you can use as templates for other operating systems. For both Ubuntu and CentOS, you have to download your version of the nginx-repo-crt and nginx-repo-key files fromhttp://cs.nginx.com, the portal for NGINX Plus customers who have purchased or are evaluating NGINX Plus. Copy the files to the directory where the Dockerfile is located (the Docker build context).

As with open source NGINX, by default the NGINX Plus access and error logs are linked to the Docker log collector. No volumes are specified, but you can add them if desired, or these Dockerfiles can be used to create base images from which you can create new images with volumes specified, as described previously.

By default, no files are copied from the Docker host as a container is created. You can add COPYdefinitions to the Dockerfiles, or the image you create can be used as the basis for another image as described above.

Dockerfile for Ubuntu

FROM ubuntu:14.04

MAINTAINER NGINX Docker Maintainers "docker-maint@nginx.com"

# Set the debconf front end to Noninteractive
RUN echo 'debconf debconf/frontend select Noninteractive' | debconf-set-selections

RUN apt-get update && apt-get install -y -q wget apt-transport-https

# Download certificate and key from the customer portal (https://cs.nginx.com)
# and copy to the build context
ADD nginx-repo.crt /etc/ssl/nginx/
ADD nginx-repo.key /etc/ssl/nginx/

# Get other files required for installation
RUN wget -q -O /etc/ssl/nginx/CA.crt https://cs.nginx.com/static/files/CA.crt
RUN wget -q -O - http://nginx.org/keys/nginx_signing.key | apt-key add -
RUN wget -q -O /etc/apt/apt.conf.d/90nginx https://cs.nginx.com/static/files/90nginx

RUN printf "deb https://plus-pkgs.nginx.com/ubuntu `lsb_release -cs` nginx-plus\n" >/etc/apt/sources.list.d/nginx-plus.list

# Install NGINX Plus
RUN apt-get update && apt-get install -y nginx-plus

# forward request logs to Docker log collector
RUN ln -sf /dev/stdout /var/log/nginx/access.log
RUN ln -sf /dev/stderr /var/log/nginx/error.log

EXPOSE 80 443

CMD ["nginx", "-g", "daemon off;"]

Dockerfile for CentOS

FROM centos:centos7

MAINTAINER NGINX Docker Maintainers "docker-maint@nginx.com"

RUN yum install -y wget

# Download certificate and key from the customer portal (https://cs.nginx.com)
# and copy to the build context
ADD nginx-repo.crt /etc/ssl/nginx/
ADD nginx-repo.key /etc/ssl/nginx/

# Get other files required for installation
RUN wget -q -O /etc/ssl/nginx/CA.crt https://cs.nginx.com/static/files/CA.crt
RUN wget -q -O /etc/yum.repos.d/nginx-plus-7.repo https://cs.nginx.com/static/files/nginx-plus-7.repo

# Install NGINX Plus
RUN yum install -y nginx-plus

# forward request logs to Docker log collector
RUN ln -sf /dev/stdout /var/log/nginx/access.log
RUN ln -sf /dev/stderr /var/log/nginx/error.log

EXPOSE 80 443

CMD ["nginx", "-g", "daemon off;"]

Creating the NGINX Plus Image

With the Dockerfile, nginx-repo-crt, and nginx-repo.key files in the same directory, run the following command there to create a Docker image called nginxplus (as before, note the final period):

# docker build --no-cache -t nginxplus .

Note the --no-cache option, which tells Docker to build the image from scratch and ensures the installation of the latest version of NGINX Plus. If the Dockerfile was previously used to build an image and you do not include the --no-cache option, the new image uses the version of NGINX Plus from the Docker cache. (We purposely do not specify a version in the <Dockerfile so that the file does not need to change at every new release of NGINX Plus.) Omit the --no-cache option if it’s acceptable to use the NGINX Plus version from the previously built image.

Output like the following from the docker images ngxinplus command indicates that the image was created successfully:

# # docker images nginxplus
REPOSITORY  TAG     IMAGE ID      CREATED        VIRTUAL SIZE
nginxplus   latest  ef2bf65931cf  6 seconds ago  281.3 MB

To create a container named mynginxplus based on this container, run this command:

# docker run --name mynginxplus -P -d nginxplus

You can control and manage NGINX Plus containers in the same way as NGINX containers.

Summary

NGINX, NGINX Plus, and Docker work extremely well together. Whether you use the open source NGINX image from the Docker Hub repository or create your own NGINX Plus image, you can easily spin up new instances of NGINX and NGINX Plus in Docker containers. You can also easily create new Docker images from the base images, making your containers even easier to control and manage. One thing to keep in mind is that NGINX Plus is sold on a per-instance basis, so each Docker container running NGINX Plus requires a separate subscription.

There is much more to Docker than we have been able to cover in this article. More information is available at www.docker.com.

By Rick Nelson for the NGINX Blog.

Docker (software) Plus (programming language) Command (computing) Directory Host (Unix) Open source

Published at DZone with permission of Patrick Nommensen, DZone MVB. See the original article here.

Opinions expressed by DZone contributors are their own.

Related

Trending