Software Testing Errors to Look Out For (With Examples)

Software will never be bug-free. However, it’s important to minimize the number of bugs such that the impact on the functionality and user experience of an application is minimized. Bugs could come up due to different reasons. In this article, we will discuss them from the perspective of software errors. These are the errors that also need attention during the testing phase.

We can divide the errors during software development into two sections for easy understanding:

1. Software errors
2. Testing errors

Let’s understand each of them in detail below.

Software Errors

1. User Interface Errors

The user interface of an application comprises functionality, intuitive use, messages, page redirects, ease of use, ease of remembering the UI, etc. Website speed test help you to identify the error easily. A few of the errors that can be faced due to a poorly designed UI are:

Functional Errors

These software errors are usually uncovered during functionality testing and mostly can be present as:

• Difficult/confusing functionality: If the user is unable to understand or perform a function on the application, then it should change. The UI is meant to be intuitive and easy for the user.
• Non-performance of the intended function: If the software is unable to perform the function as intended, then this is an error. 
• Example: An e-commerce website is unable to process the payment part. Then such a website is of no use to the customer, and this is a functional error.

Incorrect Manuals and User Guides

They should not boast about the application and should clearly and concisely mention what the application does. This will eradicate the chances of a misled user, who is unable to perform a task successfully on the application. These errors are caught during software documentation testing.

2. Information/Content Related Errors

These errors can cause wrong information to be conveyed to the users. These errors come up during the UI testing of a software application.

On-Screen Information for Users

The information which is required by the user should be available on the application screen itself. A user will not want to consult the user guide for every other function.

Showing Activity During Long Tasks

The application should display the activity/progress bar when a long task is being executed. Otherwise, the user will assume that the screen has frozen. 

For example, if a user has submitted a form, and the progress bar is showing no progress or activity, then the user will get confused if the form has been submitted successfully or not. He may think that the software got stuck and a system restart is needed.

Spelling Mistakes

You may think that wrong spellings are not a big deal, but they are. They look unprofessional and leave a bad impression of the application.

Precise Messages

The error/dialog boxes should have short and crisp messages. No one wants to read long verbose messages while performing a task.

Dialog Box Layout

There should be consistency in the layout, capitalization, style, spacing, buttons, etc. of the dialog boxes. 

3. Wrong Redirection

The redirection of the links on the website should be thoroughly checked. It will leave a really bad impression if the user clicks are redirected to an unintended page. 

• Example: The user clicks on the "home" icon and she stays on the same page. Additionally, there are no other links to move back to the home page. This is a really bad UI error.

Error Handling

Failure to handle errors appropriately may result in absurd results, which we certainly want to avoid. We can anticipate and correct an error by using the below conditions:

Overflow Condition

It occurs when the arithmetic calculation results in a value that is way too large for the software program to handle.

• Example: Divide by zero, multiplication of 2 large numbers, etc.

Error Condition

The impossible values should be identified and removed from the program, otherwise, they will result in error conditions. 

• Example: A program performs a task when the value of the boolean variable is True and another task when the value of the boolean variable is False. But when NULL is passed, the behavior of the program is unknown; hence we should make sure that the boolean variable has a value of either True or False, and nothing else. Also, if there is a condition when NULL is the outcome, it should be handled gracefully.

Error Flags

Programmers usually pass an Error Flag in the function to keep track of the success or failure of the function. It is advisable to always check this value of the flag before using the returned value from the function. Otherwise, it may result in the processing of garbage data and erroneous results.

Hardware Error

We focus on software so much that we forget about the hardware failures. If the hardware gets disconnected or stops working then we cannot expect correct output from the software. 

• Example: Printers and other hardware devices return bits of information that something is not right.

Calculation Errors

After performing a calculation, software programs may fetch wrong results for any of the following reasons:

• Incorrect logic: This can happen when a wrong formula is used for calculation. Another example is when there is a typo error by a programmer and the whole logic changes due to a change in formula/operation.
• Incorrect arithmetic operator order:Precedence of the operators should be kept in mind while dealing with arithmetic operators. 
  • Example: 2+5*4, the result of this will vary according to the operator precedence. Programmers may assume that the operation will execute from left to right and the answer will be 28. However, multiplication has higher precedence and it will be executed first, so the result is 22.
• Truncation and round-off errors: When dealing with floating numbers, the value may get truncated or rounded, and will lead to precision errors.

Control Flow Errors

Control flow decides where the program’s control will move next, this is described using the control statements. Control flow-related errors may arise when the flow of the program is changed abruptly.

• Example: Stack overflow error, exception handling issues, blocking/unblocking the interrupts in the program.

Testing Errors

This section explains the possible errors a tester can make during the software testing process. We can never catch all the possible bugs in the program. There will always be a few which will be left undetected. However, we always look forward to achieving as much test coverage as possible so that the maximum number of bugs are detected and fixed. 

Still, we may face the below-mentioned errors while performing software testing.

1. Data Handling Errors

The test data file contains bad data, and you weren’t aware of it during the testing process. The test results received will be awkward and concerning, and it becomes difficult to find the root cause of the error in this case.

2. Verification of Fixes

 Usually, the developers fix only the issues that are mentioned in the defect report. It is the responsibility of the tester to test related functionalities as well, as to make sure nothing else is broken.

• Example: A field value consisting of the customer’s name was accepting blank values, although the field is mandatory. The developer has fixed it, during testing the field is not accepting blank values, but it is accepting numeric values now. Such instances happen and the tester should use her vigilance while testing. Therefore, regression testing is so important after defect fixes.

3. Hardware Issues

These are the testing issues posed due to wrong/unavailable hardware.

• Example: While reading a file, the file is corrupted and we receive a  "Resource not available" error. Now this hardware issue is affecting the testing process indirectly.
• Another example can be when we are sending data through the Connect: Direct channel and the network is not working properly. In this case, the data transfer will not happen and we will not be able to test end-to-end.

4. SSL Certificate Issues

During testing, if the website does not have a valid SSL certificate we may receive an SSL certificate error. In this case, we can accept the risk and continue for testing purposes. But, on production, a valid SSL certificate is a must. So, you can buy a valid SSL certificate.

5. Defect Slippage

This is the most daunting error a tester may commit, but it happens! It may happen due to any of the following reasons:

1. Correct expected results not known
2. Inattentiveness
3. Difficult test steps

6. Bug Reporting

The bugs need to be found, reported, fixed, and verified: every step holds its value. We should report the bug with proper evidence, reports, and steps to reproduce. The report should be correct and if it has huge data then highlight the wrong results for readability.

7. Automation-Related Errors

Incorrect Element Locator

If the Xpath, id, name, etc. used in the automation script are incorrect, then it would result in wrong test script steps. The script will not find the required element and eventually will fail.

Iframe

When the selected element is in a different frame, we will receive an error - "element not found" - even by using the correct locator. So, to resolve this, we need to shift the control to the iframe, where the element is located. 

Conclusion

During testing, if we ensure proper test coverage then we can eliminate critical and major defects effectively. A quality application/software is imperative for business growth and user acquisition. Therefore, the testing should work on understanding the business requirements thoroughly and writing test cases accordingly.

More test cases do not mean better testing: we require good requirement coverage for effective testing. Additionally, there should be good risk coverage so that the business’s important features are tested in-depth. Proper bug reporting, defect retesting, regression tests, verification of fixes, etc. all are important steps toward high-quality software.